Why Is My Toilet So Slow To Fill Up With Water?

Why Is My Toilet So Slow To Fill Up With Water

Why Is My Toilet So Slow To Fill Up With Water?

A toilet that is slow to fill up with water is frustrating. It impedes proper use and is made even worse if it is your house’s only toilet. There are many things that can cause your toilet tank to fill up with water slowly. Some of them you can even fix yourself, without the need for a plumber in Oshawa to come over and help.

In this article, we’re going to take a look at a few of the reasons your toilet is slow to fill up with water as well as some quick fixes you can try. We would always recommend that anyone who has little plumbing experience should contact an Oshawa plumber to help them before trying anything themselves.

The Water Supply Hose Is Clogged

Every toilet has a water supply hose that allows it to be filled with water. If this gets clogged, your toilet will be slow to fill up. The water supply valve or hose is the little knob that sticks out of your wall and sits just below the toilet tank.

The valve is essentially the unit that controls the water flow to your toilet. If it is even partially blocked, not enough water can get through it to fill up the toilet tank. It is possible for the hose to be partially and fully blocked.

A service that does plumbing in Oshawa will be able to help you out if you suspect your water supply valve is clogged.

The Valve Fill Is Clogged

The fill valve controls the water level of your toilet tank. Usually, if you have exhausted all other possible issues, you should check the integrity of your fill valve. Fill valves wear over time and can become clogged, worn down and misaligned – all of which can contribute to a slow filling toilet tank.

Fill valves are usually on the left of the tank, mounted on the wall. If you’ve determined that the fill valve is your problem, you can do a quick survey of the damage. Check for signs of wear and tear, misalignment, and blockages.

Remember to reach out to people who offer plumbing in Oshawa if you think a clogged fill valve is the problem. Although you might want to do the job yourself, it is always better to leave it up to the professionals.

The Shut Off Valve Isn’t Completely Open

The shut-off valve is usually located near the toilet’s water supply. All kinds of plumbing fixtures have a shut-off valve, and if the shut-off valve on your toilet isn’t open fully, it can cause problems. Check that your shut-off valve is completely open to ensure it is not causing a slow filling toilet tank.

Checking the shut-off valve is generally something that you can do yourself, but if you are worried about causing a problem, don’t hesitate to reach out to a team that offers plumbing in Oshawa.

The Float Ball Is Waterlogged

The float ball sits in the toilet tank and controls the flow of water into the tank. It sits on the surface of the water and ensures that the toilet does not fill up too much and overflows. A waterlogged float ball can inhibit the flow of water into the toilet tank.

A waterlogged float ball will not float as efficiently as a clean one which means that the ball will stop the adequate amount of water from filling the toilet tank. If this is the case, you can simply replace the old float ball with a new one.

It is important to note that the use of a float ball is considered old plumbing technology. You could consider reaching out to an Oshawa plumber to help you replace and upgrade your toilet.

Some Solutions You Can Try

Below are a few methods that you can try in order to solve the problem of a slow filling toilet. If you’re a total novice at toilet repairs, it is important you reach out to someone who does plumbing in Oshawa to help you out!

Check The Water Supply Valve

As mentioned above, the water supply valve could be the key to your issues with a slow filling toilet. Check that it is opened fully before anything else. As it controls the amount of water that is allowed into the tank, if it is partially or fully closed, your toilet won’t fill properly.

A closed water supply valve is a pretty easy fix, but don’t do anything you’re not comfortable with when it comes to plumbing fixes.

Check Your Fill Valve

The fill valve we discussed earlier is the next thing that you should check. If you’re not sure about what you’re doing when it comes to plumbing, it may be best to leave most of it to the experts. However, you can have a quick check of the valve, make sure it is properly aligned, and if you find any problems, call a plumber.

If you’re confident in your plumbing skills, you could also try cleaning the fill valve. If you have noticed mineral building up in the fill valve, this could be causing the blockage.

Replace The Float Ball

As we mentioned above, a waterlogged float ball can cause real issues for your toilet tank. If you’ve found that yours is no longer effective, it’s time to replace it.

Get In Touch With A Plumber In Oshawa

While you can solve some of your toilet issues on your own, we always recommend leaving it to the professionals. This way, you know that you will have your toilet filling properly in no time. Get in touch with a plumber and have them check your toilet to find the issue and fix it quickly.

Need A Professional Plumber In Oshawa To Help You Fix Your Toilet? Call Caldwell Plumbing!

Are you in need of a plumber in Oshawa or Durham Region? Caldwell Plumbing has years of experience in the industry and we’re confident we can solve any plumbing problems that you have. We’re well-known for our excellent customer service and we’re always on hand to help you out. Get in touch today or call us at 289-240-7482 to find out more about our services.


Leave a Reply

Your email address will not be published. Required fields are marked *